NXT Series Reader
NXT-5RE Exit Proximity Reader
Medium Sized, NXT Reader – The NXT-5R measures 4.18 inches high by 2.95 inches wide by .625 inches deep (10.6 cm high x 7.5 cm wide x 1.6 cm deep) and can be mounted on a US single gang electrical box or flat on a wall. Read range is up to 6″ (15cm) when mounted at least one inch off metal. If the reader is mounted using a metal electrical junction box with the thickness of the wall material separating the reader from the box, read range will be reduced.
The Exit reader is installed into the same reader bus as the Entry reader, and within Doors.NET you can enable the Exit reader for Entry/Exit Configurations from a Single reader bus.
- Single Bus Entry & Exit
- NXT or HID 125-kHz credentials
- Up to 6" read range (15.24cm)
- Lifetime Warranty
- 300m Wiring Distance
- Supervised Line
NXT Readers can be ordered as “Entrance” or “Exit” readers when used with NXT Controllers (Mercury-Powered versions), which doubles the controller’s reader capacity. For “Exit” readers, specify model numbers with an E at end of model number (i.e., NXT-5RE).
They can now be configured to read certain HID 125 KHz cards and tags such as the HID ® Prox II Credentials, thus providing all of the benefits listed above and eliminating the need for an NXT-WI or NXT-RM3 Reader Interface Board.